Differences

This shows you the differences between two versions of the page.

--- amc:ss2023:group-c:start [2023/07/11 21:57] – fatima.mendoza
+++ amc:ss2023:group-c:start [2023/07/24 23:21] (current) – [4.1. Improvements] pablo-antonio.castillo-castillo
@@ Line 26: / Line 26: @@
   * Locate your bird house.
-To build your bird house this link is helpful: [[https://www.adfg.alaska.gov/index.cfm?adfg=livingwithbirds.birdhousetips#:~:text=Wood%20is%20the%20best%20material,3%2F4%2Dinch%20plywood|helpful]]
+[[https://www.adfg.alaska.gov/index.cfm?adfg=livingwithbirds.birdhousetips#:~:text=Wood%20is%20the%20best%20material,3%2F4%2Dinch%20plywood|A Guide to Building and Placing Birdhouses]]
+[[https://woodworkly.com/best-wood-for-birdhouse/|9 Best Wood for Birdhouse]]
-To select the material of your bird house this link is helpful:
-https://woodworkly.com/best-wood-for-birdhouse/
@@ Line 41: / Line 39: @@
   * Shading from the sun is not required. Keep in mind the color of the house and the material so it won’t overheat in the summer. It’s not necessary that the house is place in a shadow place, but it can provide some protection from the afternoon sun.
-To place your bird house this link is helpful:
+[[https://birdingoutdoors.com/whats-the-best-location-for-a-bird-house/|The Best Location For A Bird House ]]
-https://birdingoutdoors.com/whats-the-best-location-for-a-bird-house/
 ==== 2.2. Hardware ====
@@ Line 50: / Line 46: @@
 {{:amc:ss2023:group-c:cam_esp32.png?200|}}
-Link to the figure: https://www.reichelt.de/de/de/entwicklerboards-esp32-kamera-2mp-25--debo-cam-esp32-p266036.html?r=1
+[[https://www.reichelt.de/de/de/entwicklerboards-esp32-kamera-2mp-25--debo-cam-esp32-p266036.html?r=1|DEBO CAM ESP32]]
-Link to the specifications and data sheet: https://loboris.eu/ESP32/ESP32-CAM%20Product%20Specification.pdf#:~:text=Module%20Model%20ESP32-CAM%20Package%20DIP-16%20Size%2027%2A40.5%2A4.5%02%C3%84%C2%B10.2%02%C3%85mm%20SPI,Storage%20Environment%20-40%20%01%07~%2090%20%01%07%2C%20%3C%2090%25RH
+[[https://loboris.eu/ESP32/ESP32-CAM%20Product%20Specification.pdf#:~:text=Module%20Model%20ESP32-CAM%20Package%20DIP-16%20Size%2027%2A40.5%2A4.5%02%C3%84%C2%B10.2%02%C3%85mm%20SPI,Storage%20Environment%20-40%20%01%07~%2090%20%01%07%2C%20%3C%2090%25RH|Product Specifications]]
 The ESP32-CAM has a very competitive small-size camera module that can operate independently as a minimum system with a footprint of only 27*40.5*4.5mm and a deep sleep current of up to 6mA.
@@ Line 59: / Line 55: @@
 ESP-32CAM adopts DIP package and can be directly inserted into the backplane to realize rapid production of products, providing customers with high-reliability connection mode, which is convenient for application in various loT hardware terminals.
-Why was this module chosen?
@@ Line 66: / Line 60: @@
 {{:amc:ss2023:group-c:mini_pir_motion_sensor.jpg?200|}}
-Link to the figure: https://www.seeedstudio.com/Grove-mini-PIR-motion-sensor-p-2930.html
+[[https://www.seeedstudio.com/Grove-mini-PIR-motion-sensor-p-2930.html|Details mini PIR motion sensor]]
-Link to the specifications and data sheet: https://www.seeedstudio.com/Grove-mini-PIR-motion-sensor-p-2930.html
 The Grove – mini PIR motion sensor is a compact, low power consumption, and cost-effective PIR sensor which is suitable for applications with relatively less detection distance requirements.
@@ Line 81: / Line 73: @@
 {{:amc:ss2023:group-c:sensor-de-temperatura-y-humedad-relativa-dht22-am2302.jpg?200|}}
-Link to the figure: https://cityos-air.readme.io/docs/4-dht22-digital-temperature-humidity-sensor
+[[https://cityos-air.readme.io/docs/4-dht22-digital-temperature-humidity-sensor|DHT22 - Digital Temperature and Humidity Sensor]]
-Link to the specifications and data sheet: https://thepihut.com/products/dht22-temperature-humidity-sensor-extras#:~:text=The%20DHT22%20uses%20a%20capacitive,careful%20timing%20to%20grab%20data.
+[[https://pdf1.alldatasheet.com/datasheet-pdf/view/1132459/ETC2/DHT22.html|DHT22 Datasheet (PDF) - List of Unclassifed Manufacturers]]
-https://pdf1.alldatasheet.com/datasheet-pdf/view/1132459/ETC2/DHT22.html
 The DHT22 is a basic, low-cost digital temperature and humidity sensor. Due to its low cost and ease of use, you'll find project examples all over the web for these simple sensors.
@@ Line 95: / Line 85: @@
 {{:amc:ss2023:group-c:uartsbee_v5_new.jpg?200|}}
-Link to the figure: https://www.seeedstudio.com/UartSBee-V5.html
+[[https://www.seeedstudio.com/UartSBee-V5.html|Details UartSBee V5]]
-Link to the specifications and data sheet: https://www.seeedstudio.com/UartSBee-V5.html
 UartSBee v5' is FTDI cable compatible USB to Serial adapter equipped with BEE socket(20pin 2.0mm). The integrated FT232RL can be used for programming or communicating with MCUs. On the other hand, you might connect your PC to various wireless applications via a Bee compatible module. UartSBee provides breakouts for the bit-bang mode pins of FT232RL as well.This Bit-bang mode pins (8 I/O pins) can be used as a replacement for applications involving PC parallel port which is scares now a day.
@@ Line 105: / Line 93: @@
 {{:amc:ss2023:group-c:4755-00.jpg?200|}}
-Link to the figure: https://www.exp-tech.de/en/modules/lipo-charger/10407/universal-usb/dc/solar-lithium-ion/polymer-charger
+[[https://www.exp-tech.de/en/modules/lipo-charger/10407/universal-usb/dc/solar-lithium-ion/polymer-charger|Description Universal USB/DC/Solar Lithium Ion/Polymer charger]]
-Link to the specifications and data sheet: https://www.adafruit.com/product/4755
+[[https://www.adafruit.com/product/4755|Adafruit Universal USB / DC / Solar Lithium Ion/Polymer charger]]
 This charger is the only one you need to keep all your Lithium Polymer (LiPoly) or Lithium Ion (LiIon) rechargeable batteries topped up. No matter the power source at your disposal! The Adafruit Universal USB / DC / Solar Lithium Ion/Polymer Charger can use USB, DC or Solar power, with a wide 5-10V input voltage range! The charger chip is super smart, and will reduce the current draw if the input voltage starts to dip under 4.5V, making it a perfect near-MPPT solar charger that you can use with a wide range of panels.
@@ Line 114: / Line 102: @@
 {{:amc:ss2023:group-c:debo_solar_0_5w_01.png?200|}}
-Link to more specifications about solar panels: https://www.britannica.com/technology/solar-panel
+[[https://www.britannica.com/technology/solar-panel|Solar panel technology]]
 A solar pannel is a component of a photovoltaic system that is made out of a series of photovoltaic cells arranged to generate electricity using sunlight. Size 13 cm x 15 cm.
@@ Line 121: / Line 109: @@
 ==== 2.3. Software ====
+=== 2.3.1.Flow chart of Smart Bird House ===
+{{:amc:ss2023:group-c:flow_chart.png?600|}}
+=== 2.3.2.Hardware Set Up ===
+{{:amc:ss2023:group-c:whatsapp_image_2023-07-21_at_7.20.38_pm.jpeg?600|}}
+=== 2.3.3.Electric Diagram of Smart Bird House ===
+{{:amc:ss2023:group-c:schematic.png?600|}}
+=== 2.3.4.Raw Code ===
+<code c++>
+/*
+Source of information:
+https://randomnerdtutorials.com/esp32-cam-pir-motion-detector-photo-capture/
+https://randomnerdtutorials.com/esp32-cam-troubleshooting-guide/
+https://www.electroniclinic.com/esp32-cam-send-images-to-google-drive-iot-security-camera/
+https://randomnerdtutorials.com/esp32-send-email-smtp-server-arduino-ide/
+*/
+//======================================== Including the libraries.
+#include <WiFi.h>
+#include <WiFiClientSecure.h>
+#include "soc/soc.h"
+#include "soc/rtc_cntl_reg.h"
+#include "Base64.h"
+#include "esp_camera.h"
+#include <string.h>
+#include "Arduino.h"
+#include "FS.h"      // SD Card ESP32
+#include "SD_MMC.h"  // SD Card ESP32
+#include "driver/rtc_io.h"
+#include "ESP_Mail_Client.h"
+#include "DHT.h"
+//========================================
+int IRpin = 13;
+int state = 0;
+//======================================== Defining Temp. and Hum. Sensor
+#define DHTTYPE DHT22  // DHT 22  (AM2302), AM2321
+// Initialize DHT sensor pin.
+#define DHTPIN 14
+DHT dht(DHTPIN, DHTTYPE);
+//======================================== CAMERA_MODEL_AI_THINKER GPIO.
+#define PWDN_GPIO_NUM 32
+#define RESET_GPIO_NUM -1
+#define XCLK_GPIO_NUM 0
+#define SIOD_GPIO_NUM 26
+#define SIOC_GPIO_NUM 27
+#define Y9_GPIO_NUM 35
+#define Y8_GPIO_NUM 34
+#define Y7_GPIO_NUM 39
+#define Y6_GPIO_NUM 36
+#define Y5_GPIO_NUM 21
+#define Y4_GPIO_NUM 19
+#define Y3_GPIO_NUM 18
+#define Y2_GPIO_NUM 5
+#define VSYNC_GPIO_NUM 25
+#define HREF_GPIO_NUM 23
+#define PCLK_GPIO_NUM 22
+//========================================
+// LED Flash PIN (GPIO 4)
+#define FLASH_LED_PIN 4
+//======================================== Enter your WiFi ssid and password.
+const char* ssid = "FRITZ!Box Gastzugang";
+const char* password = "VillaKunterbunt";
+//========================================
+//======================================== Replace with your "Deployment ID" and Folder Name.
+String myDeploymentID = "AKfycbwxhr3qbdDC105rDPUUwsJXcITatlL1rqdQh1dKv385-uiI9Z8OXrNOQ5wXUR3f5F8R";
+String myMainFolderName = "ESP32-CAM";
+//========================================
+//======================================= Mail setup
+/** The smtp host name e.g. smtp.gmail.com for GMail*/
+#define SMTP_HOST "smtp.gmail.com"
+#define SMTP_PORT 465
+/* The sign in credentials */
+#define AUTHOR_EMAIL "pablocastillopaypalpersonal@gmail.com"
+#define AUTHOR_PASSWORD "wfbqnnacjufaiafo"
+/* Recipient's email*/
+#define RECIPIENT_EMAIL "pablocastillo417@gmail.com"
+/* Declare the global used SMTPSession object for SMTP transport */
+SMTPSession smtp;
+/* Callback function to get the Email sending status */
+void smtpCallback(SMTP_Status status);
+//======================================== Variables for Timer/Millis.
+unsigned long previousMillis = 0;
+const int Interval = 20000;  //--> Capture and Send a photo every 20 seconds.
+//========================================
+// Variable to set capture photo with LED Flash.
+// Set to "false", then the Flash LED will not light up when capturing a photo.
+// Set to "true", then the Flash LED lights up when capturing a photo.
+bool LED_Flash_ON = false;
+// Initialize WiFiClientSecure.
+WiFiClientSecure client;
+//________________________________________________________________________________ Test_Con()
+// This subroutine is to test the connection to "script.google.com".
+void Test_Con() {
+  const char* host = "script.google.com";
+  while (1) {
+    Serial.println("-----------");
+    Serial.println("Connection Test...");
+    Serial.println("Connect to " + String(host));
+    client.setInsecure();
+    if (client.connect(host, 443)) {
+      Serial.println("Connection successful.");
+      Serial.println("-----------");
+      client.stop();
+      break;
+    } else {
+      Serial.println("Connected to " + String(host) + " failed.");
+      Serial.println("Wait a moment for reconnecting.");
+      Serial.println("-----------");
+      client.stop();
+    }
+    delay(1000);
+  }
+}
+//________________________________________________________________________________
+//________________________________________________________________________________ SendCapturedPhotos()
+// Subroutine for capturing and sending photos to Google Drive.
+void SendCapturedPhotos() {
+  const char* host = "script.google.com";
+  Serial.println();
+  Serial.println("-----------");
+  Serial.println("Connect to " + String(host));
+  client.setInsecure();
+  //---------------------------------------- The process of connecting, capturing and sending photos to Google Drive.
+  if (client.connect(host, 443)) {
+    Serial.println("Connection successful.");
+    if (LED_Flash_ON == true) {
+      digitalWrite(FLASH_LED_PIN, HIGH);
+      delay(100);
+    } else {
+      digitalWrite(FLASH_LED_PIN, LOW);
+    }
+    //.............................. Taking a photo.
+    Serial.println();
+    Serial.println("Taking a photo...");
+    for (int i = 0; i <= 3; i++) {
+      camera_fb_t* fb = NULL;
+      fb = esp_camera_fb_get();
+      if (!fb) {
+        Serial.println("Camera capture failed");
+        Serial.println("Restarting the ESP32 CAM.");
+        delay(1000);
+        ESP.restart();
+        return;
+      }
+      esp_camera_fb_return(fb);
+      delay(200);
+    }
+    camera_fb_t* fb = NULL;
+    fb = esp_camera_fb_get();
+    if (!fb) {
+      Serial.println("Camera capture failed");
+      Serial.println("Restarting the ESP32 CAM.");
+      delay(1000);
+      ESP.restart();
+      return;
+    }
+    if (LED_Flash_ON == true) digitalWrite(FLASH_LED_PIN, LOW);
+    Serial.println("Taking a photo was successful.");
+    //..............................
+    //.............................. Sending image to Google Drive.
+    Serial.println();
+    Serial.println("Sending image to Google Drive.");
+    Serial.println("Size: " + String(fb->len) + "byte");
+    String url = "/macros/s/" + myDeploymentID + "/exec?folder=" + myMainFolderName;
+    client.println("POST " + url + " HTTP/1.1");
+    client.println("Host: " + String(host));
+    client.println("Transfer-Encoding: chunked");
+    client.println();
+    int fbLen = fb->len;
+    char* input = (char*)fb->buf;
+    int chunkSize = 3 * 1000;  //--> must be multiple of 3.
+    int chunkBase64Size = base64_enc_len(chunkSize);
+    char output[chunkBase64Size + 1];
+    Serial.println();
+    int chunk = 0;
+    for (int i = 0; i < fbLen; i += chunkSize) {
+      int l = base64_encode(output, input, min(fbLen - i, chunkSize));
+      client.print(l, HEX);
+      client.print("\r\n");
+      client.print(output);
+      client.print("\r\n");
+      delay(100);
+      input += chunkSize;
+      Serial.print(".");
+      chunk++;
+      if (chunk % 50 == 0) {
+        Serial.println();
+      }
+    }
+    client.print("0\r\n");
+    client.print("\r\n");
+    esp_camera_fb_return(fb);
+    //..............................
+    //.............................. Waiting for response.
+    Serial.println("Waiting for response.");
+    long int StartTime = millis();
+    while (!client.available()) {
+      Serial.print(".");
+      delay(100);
+      if ((StartTime + 10 * 1000) < millis()) {
+        Serial.println();
+        Serial.println("No response.");
+        break;
+      }
+    }
+    Serial.println();
+    while (client.available()) {
+      Serial.print(char(client.read()));
+    }
+    //..............................
+  } else {
+    Serial.println("Connected to " + String(host) + " failed.");
+  }
+  //----------------------------------------
+  Serial.println("-----------");
+  client.stop();
+}
+//________________________________________________________________________________
+//======================================================= Callback function to get the Email sending status
+void smtpCallback(SMTP_Status status) {
+  /* Print the current status */
+  Serial.println(status.info());
+  /* Print the sending result */
+  if (status.success()) {
+    Serial.println("----------------");
+    ESP_MAIL_PRINTF("Message sent success: %d\n", status.completedCount());
+    ESP_MAIL_PRINTF("Message sent failed: %d\n", status.failedCount());
+    Serial.println("----------------\n");
+    for (size_t i = 0; i < smtp.sendingResult.size(); i++) {
+      /* Get the result item */
+      SMTP_Result result = smtp.sendingResult.getItem(i);
+      ESP_MAIL_PRINTF("Message No: %d\n", i + 1);
+      ESP_MAIL_PRINTF("Status: %s\n", result.completed ? "success" : "failed");
+      ESP_MAIL_PRINTF("Date/Time: %s\n", MailClient.Time.getDateTimeString(result.timestamp, "%B %d, %Y %H:%M:%S").c_str());
+      ESP_MAIL_PRINTF("Recipient: %s\n", result.recipients.c_str());
+      ESP_MAIL_PRINTF("Subject: %s\n", result.subject.c_str());
+    }
+    Serial.println("----------------\n");
+    // You need to clear sending result as the memory usage will grow up.
+    smtp.sendingResult.clear();
+  }
+}
+//________________________________________________________________________________ VOID SETUP()
+void setup() {
+  // put your setup code here, to run once:
+  // Disable brownout detector.
+  WRITE_PERI_REG(RTC_CNTL_BROWN_OUT_REG, 0);
+  //initiating the DHT Sensor
+  dht.begin();
+  //Getting temp. and hum. values
+  float h = dht.readHumidity();
+  // Read temperature as Celsius (the default)
+  float t = dht.readTemperature();
+  // Compute heat index in Celsius (isFahreheit = false)
+  float hic = dht.computeHeatIndex(t, h, false);
+  //Converting to string type
+  String hum = String(h);
+  String temp = String(t);
+  String heat_index_celsius = String(hic);
+  //initializing Serial monitor
+  Serial.begin(115200);
+  Serial.println();
+  delay(1000);
+  pinMode(FLASH_LED_PIN, OUTPUT);
+  // Setting the ESP32 WiFi to station mode.
+  Serial.println();
+  Serial.println("Setting the ESP32 WiFi to station mode.");
+  WiFi.mode(WIFI_STA);
+  //---------------------------------------- The process of connecting ESP32 CAM with WiFi Hotspot / WiFi Router.
+  Serial.println();
+  Serial.print("Connecting to : ");
+  Serial.println(ssid);
+  WiFi.begin(ssid, password);
+  // The process timeout of connecting ESP32 CAM with WiFi Hotspot / WiFi Router is 20 seconds.
+  // If within 20 seconds the ESP32 CAM has not been successfully connected to WiFi, the ESP32 CAM will restart.
+  // I made this condition because on my ESP32-CAM, there are times when it seems like it can't connect to WiFi, so it needs to be restarted to be able to connect to WiFi.
+  int connecting_process_timed_out = 20;  //--> 20 = 20 seconds.
+  connecting_process_timed_out = connecting_process_timed_out * 2;
+  while (WiFi.status() != WL_CONNECTED) {
+    Serial.print(".");
+    delay(500);
+    if (connecting_process_timed_out > 0) connecting_process_timed_out--;
+    if (connecting_process_timed_out == 0) {
+      Serial.println();
+      Serial.print("Failed to connect to ");
+      Serial.println(ssid);
+      Serial.println("Restarting the ESP32 CAM.");
+      delay(1000);
+      ESP.restart();
+    }
+  }
+  Serial.println();
+  Serial.print("Successfully connected to ");
+  Serial.println(ssid);
+  /*  Set the network reconnection option */
+  MailClient.networkReconnect(true);
+  /** Enable the debug via Serial port
+   * 0 for no debugging
+   * 1 for basic level debugging
+   */
+  smtp.debug(1);
+  /* Set the callback function to get the sending results */
+  smtp.callback(smtpCallback);
+  /* Declare the Session_Config for user defined session credentials */
+  Session_Config config_mail;
+  /* Set the session config */
+  config_mail.server.host_name = SMTP_HOST;
+  config_mail.server.port = SMTP_PORT;
+  config_mail.login.email = AUTHOR_EMAIL;
+  config_mail.login.password = AUTHOR_PASSWORD;
+  config_mail.login.user_domain = "";
+  /*
+  Set the NTP config time
+  */
+  config_mail.time.ntp_server = F("pool.ntp.org,time.nist.gov");
+  config_mail.time.gmt_offset = 2;
+  config_mail.time.day_light_offset = 0;
+  /* Declare the message class */
+  SMTP_Message message;
+  /* Set the message headers */
+  message.sender.name = F("ESP");
+  message.sender.email = AUTHOR_EMAIL;
+  message.subject = F("Smart Bird House Report");
+  message.addRecipient(F("Pablo"), RECIPIENT_EMAIL);
+  //Send raw text message
+  String textMsg = String("The temperature is: " + temp + " \nHumidity: " + hum + " \nheat index: " + heat_index_celsius + ". \nThe picture taken has been uploaded to your folder in Google Drive. - Sent from Smart Bird House");
+  message.text.content = textMsg.c_str();
+  message.text.charSet = "us-ascii";
+  message.text.transfer_encoding = Content_Transfer_Encoding::enc_7bit;
+  message.priority = esp_mail_smtp_priority::esp_mail_smtp_priority_low;
+  message.response.notify = esp_mail_smtp_notify_success | esp_mail_smtp_notify_failure | esp_mail_smtp_notify_delay;
+  /* Connect to the server */
+  if (!smtp.connect(&config_mail)) {
+    ESP_MAIL_PRINTF("Connection error, Status Code: %d, Error Code: %d, Reason: %s", smtp.statusCode(), smtp.errorCode(), smtp.errorReason().c_str());
+    ESP.restart();
+    return;
+  }
+  if (!smtp.isLoggedIn()) {
+    Serial.println("\nNot yet logged in.");
+  } else {
+    if (smtp.isAuthenticated())
+      Serial.println("\nSuccessfully logged in.");
+    else
+      Serial.println("\nConnected with no Auth.");
+  }
+  /* Start sending Email and close the session */
+  if (!MailClient.sendMail(&smtp, &message))
+    ESP_MAIL_PRINTF("Error, Status Code: %d, Error Code: %d, Reason: %s", smtp.statusCode(), smtp.errorCode(), smtp.errorReason().c_str());
+  //---------------------------------------- Set the camera ESP32 CAM.
+  Serial.println();
+  Serial.println("Set the camera ESP32 CAM...");
+  camera_config_t config;
+  config.ledc_channel = LEDC_CHANNEL_0;
+  config.ledc_timer = LEDC_TIMER_0;
+  config.pin_d0 = Y2_GPIO_NUM;
+  config.pin_d1 = Y3_GPIO_NUM;
+  config.pin_d2 = Y4_GPIO_NUM;
+  config.pin_d3 = Y5_GPIO_NUM;
+  config.pin_d4 = Y6_GPIO_NUM;
+  config.pin_d5 = Y7_GPIO_NUM;
+  config.pin_d6 = Y8_GPIO_NUM;
+  config.pin_d7 = Y9_GPIO_NUM;
+  config.pin_xclk = XCLK_GPIO_NUM;
+  config.pin_pclk = PCLK_GPIO_NUM;
+  config.pin_vsync = VSYNC_GPIO_NUM;
+  config.pin_href = HREF_GPIO_NUM;
+  config.pin_sscb_sda = SIOD_GPIO_NUM;
+  config.pin_sscb_scl = SIOC_GPIO_NUM;
+  config.pin_pwdn = PWDN_GPIO_NUM;
+  config.pin_reset = RESET_GPIO_NUM;
+  config.xclk_freq_hz = 20000000;
+  config.pixel_format = PIXFORMAT_JPEG;
+  // init with high specs to pre-allocate larger buffers
+  if (psramFound()) {
+    config.frame_size = FRAMESIZE_UXGA;
+    config.jpeg_quality = 10;  //0-63 lower number means higher quality
+    config.fb_count = 2;
+  } else {
+    config.frame_size = FRAMESIZE_SVGA;
+    config.jpeg_quality = 8;  //0-63 lower number means higher quality
+    config.fb_count = 1;
+  }
+  // camera init
+  esp_err_t err = esp_camera_init(&config);
+  if (err != ESP_OK) {
+    Serial.printf("Camera init failed with error 0x%x", err);
+    Serial.println();
+    Serial.println("Restarting the ESP32 CAM.");
+    delay(1000);
+    ESP.restart();
+  }
+  sensor_t* s = esp_camera_sensor_get();
+  // Selectable camera resolution details :
+  // -UXGA   = 1600 x 1200 pixels
+  // -SXGA   = 1280 x 1024 pixels
+  // -XGA    = 1024 x 768  pixels
+  // -SVGA   = 800 x 600   pixels
+  // -VGA    = 640 x 480   pixels
+  // -CIF    = 352 x 288   pixels
+  // -QVGA   = 320 x 240   pixels
+  // -HQVGA  = 240 x 160   pixels
+  // -QQVGA  = 160 x 120   pixels
+  s->set_framesize(s, FRAMESIZE_XGA);  //--> UXGA|SXGA|XGA|SVGA|VGA|CIF|QVGA|HQVGA|QQVGA
+  Serial.println("Setting the camera successfully.");
+  Serial.println();
+  delay(1000);
+  Test_Con();
+  SendCapturedPhotos();
+  Serial.println();
+  delay(15000);
+  rtc_gpio_hold_en(GPIO_NUM_4);
+  esp_sleep_enable_ext0_wakeup(GPIO_NUM_13, 0);
+  Serial.println("Going to sleep now");
+  delay(1000);
+  esp_deep_sleep_start();
+}
+//________________________________________________________________________________
+//________________________________________________________________________________ VOID LOOP()
+void loop() {
+}
+</code>
 ===== 3. Results =====
+{{:amc:ss2023:group-c:mail.jpg?400|}}
+{{:amc:ss2023:group-c:drive.jpg?400|}}
+{{:amc:ss2023:group-c:drive_images.jpg?400|}}
 ===== 4. Discussion and Conclusion =====
@@ Line 132: / Line 629: @@
 As always there are some improvements that can be made. It would be better to use an infrared camera so even when it's dark the pictures are visible. Also for the current design of the house there can be some improvements by providing more holes so it has more ventilation and it wont accumulate water.
+=== 4.2. Recomendations===
+  * Perform measurements to make decisions related to the energy efficiency of the project.
+  * PCB design to allow better access and manipulation of essential elements of the project.
+  * Make improvements to the code dedicated to upload the photo to google drive to minimize errors.
-===== 6. Bibliography =====
+===== 5. Bibliography =====
 This links are helpful to build, design and select the proper materials for your bird house:
-https://www.birdhouses101.com/bird-houses/materials-used-for-building-birdhouses/
+[[https://www.birdhouses101.com/bird-houses/materials-used-for-building-birdhouses/|Materials Used for Building Birdhouses]]
-https://www.thespruce.com/before-you-build-a-birdhouse-386647
+[[https://www.thespruce.com/before-you-build-a-birdhouse-386647|Tips for Birdhouse Design and Building]]