Differences

This shows you the differences between two versions of the page.

--- amc:ss2024:home_assistant_server:start [2024/07/31 02:23] – [2)Wifi AP integration] ekaterina.zakharova
+++ amc:ss2024:home_assistant_server:start [2024/07/31 02:42] (current) – [3)MQTT setup] ekaterina.zakharova
@@ Line 108: / Line 108: @@
-<imgcaption label|1 >{{:amc:ss2024:home_assistant_server:wlan_1_.jpg?700|Network configuration}}</imgcaption>
+<imgcaption label|Network configuration>{{:amc:ss2024:home_assistant_server:wlan_1_.jpg?700|Network configuration}}</imgcaption>
 ==== 3)MQTT setup ====
@@ Line 133: / Line 133: @@
        - Select it and check the box to enable MQTT discovery if desired, and hit submit.
        - If you have old MQTT settings available, remove this old integration and restart Home Assistant to see the new one.
+**Node-RED & INfluxDB & Local Tuya are installed in a similar to MQTT fashion **
@@ Line 139: / Line 140: @@
-==== Pet feeder + Zigbee motion sensor ====
-  * connected using the **{{ https://nodered.org/|Node Red tool}}**
@@ Line 158: / Line 156: @@
-----
 ===== 4. Tuya devices: pet feeder, lamp =====