Differences

This shows you the differences between two versions of the page.

--- amc:ss2025:group-e:start [2025/07/29 16:31] – [Introduction] 34602_students.hsrw
+++ amc:ss2025:group-e:start [2025/07/29 17:23] (current) – 35983_students.hsrw
@@ Line 1: / Line 1: @@
 ====== CarPi ======
 ''by Nicole Alvarado (35983), Jonathan Stuermlinger (34602), & Ben Koellner (34603)''\\
 ===== Introduction =====
+''by Jonathan Stuermlinger (34602)''\\
-For our AMC project, we developed a basic traffic monitoring system designed to detect and count vehicles as they pass through a designated section of road captured by a camera. The collected data is uploaded to a web-based dashboard, which could provide a foundation for traffic flow analysis and supporting studies on air pollution, noise levels, and overall urban livability. Such information can also play a valuable role in infrastructure planning and broader environmental monitoring initiatives.
+For our AMC project, we developed a basic traffic monitoring system using a Raspberry Pi 5, designed to detect and count vehicles as they pass through a designated section of road captured by a Pi camera. The collected data is uploaded to a web-based dashboard, which could provide a foundation for traffic flow analysis and supporting studies on air pollution, noise levels, and overall urban livability. Such information can also play a valuable role in infrastructure planning and broader environmental monitoring initiatives.
 ===== Material & Methods =====
+''by Nicole Alvarado (35983) & Ben Koellner (34603)''\\
 ==== Hardware Components ====
 The project was developed using the following hardware components:
@@ Line 32: / Line 32: @@
   * Operating System: Raspberry Pi Os (64-bit).
   * Storage: 32 GB MicroSD card.
-<imgcaption image2|>Raspberry Pi imager {{ :amc:ss2025:group-e:pi_ss.png?direct&400 |}}</imgcaption>
+<imgcaption image2|Raspberry Pi imager>{{ :amc:ss2025:group-e:pi_ss.png?direct&400 |}}</imgcaption>
 === Installing OpenCV and Required Packages ===
 To enable object detection, OpenCV version 4.8.1 was compiled. The following commands were executed on the Raspberry Pi terminal:
@@ Line 104: / Line 103: @@
 python dashboard.py
 </code>
 ===== Results =====
+''by Nicole Alvarado (35983)''\\
 ==== Code ====
-Three Python scripts were developed as part of the system's functionality.
+Three files were developed as part of the system's functionality: two Python scripts and one CSV file for data logging:
   - Object Detection
   - Vehicle Log
@@ Line 125: / Line 125: @@
 # === Load class names ===
 classNames = []
-classFile = "/home/aless/Desktop/Object_Detection_Files/coco.names"
+classFile = "/home/pi/Desktop/Object_Detection_Files/coco.names"
 with open(classFile, "rt") as f:
     classNames = f.read().rstrip("\n").split("\n")
 # === Load model config and weights ===
-configPath = "/home/aless/Desktop/Object_Detection_Files/ssd_mobilenet_v3_large_coco_2020_01_14.pbtxt"
+configPath = "/home/pi/Desktop/Object_Detection_Files/ssd_mobilenet_v3_large_coco_2020_01_14.pbtxt"
-weightsPath = "/home/aless/Desktop/Object_Detection_Files/frozen_inference_graph.pb"
+weightsPath = "/home/pi/Desktop/Object_Detection_Files/frozen_inference_graph.pb"
 assert os.path.exists(classFile), f"Missing file: {classFile}"
@@ Line 461: / Line 461: @@
 ===== Discussion & Conclusion =====
-While our traffic monitoring system functions reliably in its current form, there were several lessons learned throughout the project. Initially, our goal was to develop the system using the Raspberry Pi 5 in combination with the AI Hat and the YOLO framework for advanced object detection. However, due to repeated compatibility and setup issues, we were unable to make the AI Hat fully operational and instead opted for an alternative approach based on OpenCV and COCO libraries. An important takeaway from this experience is that a more successful integration of the AI Hat and YOLO framework would likely have required reaching out for external support early on, especially to better understand the specific requirements and limitations of the Raspberry Pi 5 and the AI Hat. Despite these challenges, the alternative solution we implemented proved to be a solid and functional approach for basic vehicle detection and counting.
+''by Jonathan Stuermlinger (34602) & Ben Koellner (34603)''\\
+While our traffic monitoring system functions reliably in its current form, several lessons emerged during development. The initial plan was to use the Raspberry Pi 5 with the AI Hat (an additional module designed to accelerate on-device AI processing) and a YOLO framework for advanced object detection. Due to repeated compatibility and setup issues, we switched to an alternative solution based on OpenCV and COCO (Common Objects in Context) libraries. In hindsight, earlier external support could have improved our understanding of the AI Hat’s requirements and potentially enabled its use. Nevertheless, the implemented solution provided a functional and low-cost approach for basic vehicle detection and counting.
 However, the system is not without limitations. For example, detecting larger vehicles such as buses proved inconsistent, especially depending on the camera angle and environmental conditions. In our case, the monitoring frame was set up between trees, which occasionally interfered with object detection.
@@ Line 471: / Line 473: @@
 Despite these challenges, the project demonstrates that a low-cost and accessible traffic monitoring solution is possible without specialized AI hardware. With further development, such a system could be adapted for real-world use cases in traffic analysis, planning, or environmental studies.
 ===== Video =====
-===== References =====
+{{ :amc:ss2025:group-e:carpi_video.mp4 |}}
--insert info
+===== References =====
+COCO - Common Objects in Context. (n.d). https://cocodataset.org/#home