Differences

This shows you the differences between two versions of the page.

--- soil_sampler:tests [2021/04/21 12:24] – [Test1] jeff001
+++ soil_sampler:tests [2023/01/05 14:38] (current) – external edit 127.0.0.1
@@ Line 3: / Line 3: @@
 ===== Drilling =====
-====Test1====
 Place: GreenFabLab, KampLintfort, Germany.\\
@@ Line 33: / Line 32: @@
 **Outlook:**
-From this test, I observed that it can not take the soil sample by drilling in one go, separate the total depth on multiple phases would be the best in this case.
+During this test, it was remarkable that [with this amount of torque and these soil conditions] it is not possible to take a soil sample by drilling more than 30 centimeters deep in one go, separate the total depth on multiple phases would be a good an alternative to increasing torque in this case.
-Measuring the torque in every moment, then when the torque demanded increases, finish that phase, clean the bit and continue with the next one.
+<!--Measuring the torque in every moment, then when the torque demanded increases, finish that phase, clean the bit and continue with the next one.-->